English 101/102 - A Tune And Service Guide

[T140-Oli]

English 101 - A Tune And Service Guide for Vintage Triumph and BSA Motorcycles by Lobrow Customs
https://www.youtube.com/watch?v=hfvYEdlCIvk

Das Video sind amerikanisch/englisch, unten die Inhaltsangabe. Im YT-Video selbst sind auch direkt die Sprungmarken verlinkt.

01:24 - Introduction and Valve Adjustments
03:06 - Valve adjustments on Triumph Unit motor out of bike.
14:13- Tips on doing a valve adjustment on a Triumph Pre-unit motor while motor is in a bike.
15:13 - BSA Valve adjustment.
22:28 - Oil in frame Triumph Unit motors look different.
23:22 - BSA Primary side and adjustments overview.
26:42 - BSA motorcycle overview, difference and similarities to Triumph
32:08 - Finding Top Dead Center
32:10 - Finding top dead center on a Triumph Unit motor
49:03 - Finding top dead center on a Triumph Pre-Unit motor
58:41 - Ignition Systems - Magneto, Electronic ignition and points.
58:45 - How to install and time a Joe Hunt Magneto on a Triumph Unit motor.
01:13:20 - How to set up and use a timing light and what to do for points, electronic or mag.
01:14:56 - Installing a Lucas Magneto on a Triumph Pre-Unit Motor.
01:19:00 - Installing advance wheel, see the difference in two different kinds.
01:20:10 - How to install full advance bob weight wheel.
01:23:00 - How to install normal advance wheel.
01:27:25 - Oil Systems and Oil Changes.
01:27:54 - Oil lines, how they should be and how they work.
01:35:06 - Some extra stuff to know with Pre-unit motors about oil lines.
01:35:35 - Oil pressure reals valve on a Triumph Unit Motor.
01:38:06 - What to drain, unplug etc. and what not to on Triumph Unit Motor.
01:42:28 - Oil Change on Triumph Pre-unit Motor differences.
01:49:19 - Primary cover on Triumph Pre-Unit Motor
01:50:57 - Chain Adjustments
01:51:03 - Adjust the primary chain on a Triumph Pre-Unit Motor.
02:07:01 - Check your chain for ware and check your sprocket.
02:08:26 - BSA Chain adjustment differences.
02:09:35 - What to look out for in Dunlop vintage British Wheels.
02:11:33 - Transmission Primary chain adjustment on swing arm Triumph Pre-Unit motor.
02:14:26 - Carburetors on Triumph Pre-Unit.
02:17:03 - Adjust primary chain on Triumph Unit Motor.
02:20:25 - Adjust primary chain on BSA Motor.
02:24:14 - Clutch Adjustments
02:24:25 - Clutch adjustment of the pushrod on a Triumph Unit Motor.
02:26:58 - Clutch cable adjustment on a Triumph Pre-Unit Motor.
02:32:44 - Clutch cable adjustment on a Triumph Unit Motor.
02:36:44 - Carburetor Tips, Basics on Amal Carbs
02:46:14 - Setting up proper slack in your throttle cable that goes to your carburetors.
02:56:35 - Float Stuck talks.
02:57:29 - single carb vs dual carb setup.
02:58:43 - Dissembling and cleaning your Amal Carburetor.
03:11:07 - Electrical System Maintenance.
03:11:24 - Test your battery.
03:16:18 - Quick test of the alternator.
03:17:30 - Test Light basics
03:22:31 - Test the length of your spark.
03:23:38 - Lucas competition magneto overview
03:25:19 - Boyer ignition plate installation on a Triumph Unit Motor.
03:30:20 - Boyer ignition plate installation on a BSA Motor.
03:31:38 - Adjust points on a BSA Motor.
03:35:51 - Handy Dandy Tips and Tricks.
03:38:52 - Compression Test.
03:43:04 - Trouble starting?
03:45:30 - Chassis and Wheels.
03:45:38 - Check your wheel bearings.
03:50:41 - Putting the wheel hub / brake plate back together.
03:52:27 - Check your brakes.
03:55:34 - Triumph Pre-Unit front wheel overview
03:56:28 - Changing out neck bearings with a Timken bearing conversion kit.
04:06:56 - How to check your steering head in your neck.
04:08:09 - tighten up the triple trees.
04:10:29 - Check your tire pressure!
04:11:09 - Outro, Thanks for watching now go for a ride!

[T140-Oli]

English 102 - A Tune And Service Guide for Vintage Unit and Pre-Unit Triumph & BSA Motorcycles

https://www.youtube.com/watch?v=Z8aqdwljUz0&t=0s

01:22 - Intro
01:43 - Wiring and Electrical.
02:49 - Making power - Generator and Alternator overviews.
04:38 - Regulator overview.
06:33 - Examples of what generator looks like on a bike.
07:17 - Example of Lucas K2F magneto.
07:59 - Battery talk and why to run one or not.
09:03 - Important info about distribution of all of these components.
10:58 - Ignition systems.
14:12 - Note BSA and Triumphs have different rotation for Magnetos.
16:10 - Example of Joe Hunt Magneto Ignition system.
17:09 - Simple wiring for Magneto.
18:25 - Differences between a Lucas Magneto and a Joe Hunt Magneto
22:02 - Accessories and lighting.
24:44 - Example of deluxe brake light switch.
25:30 - Problem and troubleshooting electrical systems.
35:14 - A look at the coils on a motorcycle what to look for when mounted under a gas tank.
37:48 - Troubleshooting electrical accessories.
39:32 - Troubleshooting Magneto problems.
42:38 - Conclusion of Electrical systems and troubleshooting.
43:54 - Tips for keeping your wiring nice and clean.
54:21 - Troubleshooting electrical issues on motorcycle.
01:00:40 - How to test for spark.
01:05:17 - How to do a load test.
01:08:45 - More things to look for when having electrical issues on the motorcycle, rectifier and light switch hook ups.
01:13:17 - Conclusion of trouble shooting this motorcycle.
01:14:04 - Front Ends
01:14:49 - What to Inspect first and reasons why you should possibly take apart your front end.
01:17:25 - Front end disassembly from the motorcycle
01:23:00 - Disassembly of the fork tube leg.
01:24:21- How to take seal holder off the fork tube leg correctly.
01:25:16 - The guts of the fork tube leg. What to inspect.
01:29:40 - Removing the pesky bottom fork tube bushing.
01:32:56 - Last step in disassembling fork tube leg.
01:35:28 - Knock out the old seal in your seal holder.
01:36:48 - Reinstall seal in the seal holder.
01:39:02 - Different variations of the vintage forks 50s/60s/70s.
01:52:14 - Variations of the different year triple trees.
01:55:34 - Differences lengths in axels.
01:58:23 - Late P clamp triple tree for BSA and Triumph.
02:00:11 - How to reassemble the fork legs.
02:07:59 - How to reinstall the leg onto the triple tree on the motorcycle.
02:13:40 - Conclusion on front fork legs.
02:14:12 - Carburetors
02:15:44 - Showing the differences of the Amal Carburetors over the years.
02:16:37 - Monoblock Carburetor overview, taking it apart.
02:19:00 - Concentric Carburetor overview.
02:25:25 - Taking apart concentric carb.
02:26:39 - Different sizes of Amal Carbs
02:28:20 - Amal Floats, inspection.
02:30:48 - Mikuni Carburetor overview.
02:36:21 - Taking a look inside some of the guts of the Mikuni carb.
02:48:31 - JRC Carburetor overview.
02:50:41 - Taking a look inside the JRC carb.
03:02:03 - Cam Bushing reaming. Removing cam bushing from timing chest side of case.
03:06:30 - Installing a cam bushing on timing chest side of case.
03:10:25 - Removing Cam bushing from primary side of case.
03:13:10 - Installing cam bushing on primary side of case.
03:20:41 - Reaming the new bushings.
03:33:08 - Clutch Hub Rubbers what to look for and how to replace.
03:43:58 - Thats all Folks